|Rongda Industrial Park, Xinhua Road, Wangting Town, Suzhou City, China|
|Place of Origin:||Jiangsu|
|Model Number:||3/32-1/4 inch (2.4-6.4mm)|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||bulk packing, small box packing, packing as required|
|Delivery Time:||20-30 working days|
|Payment Terms:||T/T, L/C, D/P|
|Supply Ability:||200 ton per month|
|Material:||Stainless Steel, Carbon Steel, Aluminum||Head:||Flat Dome Head|
|Packing:||Bulk Packing, Small Box Packing, Plastic Bag Packing||Sizes:||3/32-1/4 Inch (2.4-6.4mm)|
aluminum pop rivets home depot,
aluminum boat rivets
1/8 " X 1/4 " Pop Rivet Solid Aluminium Countersunk Rivets DIN7337 Stainless Steel
Blind rivets are mainly used when access to the base material is available from only one side. There are many applications where the back of the base material cannot be accessed, as in fastening to walls or tubes. In cases where the back or “blind” side of the material cannot be reached, it is not feasible to use sheet metal screws, nuts and bolts, or welds. Even the use of solid rivets requires access to the rear of the base material. Blind rivets form a very valuable function in these applications, and can be extremely cost effective.
Cost is a major reason why a manufacturer might choose to use a blind rivet in an application. The unit cost of blind rivets is much lower than the cost of most other types of fasteners. The labor cost savings is equally impressive, because they can be installed at a rate of up to 15 rivets per minute. Try matching that speed with a nut/bolt installation!
The typical governing factors in rivet material selection are strength, corrosion resistance and the material to be fastened.
Galvanic corrosion, also called “dissimilar metal corrosion” refers to corrosion damage induced when two dissimilar materials are coupled in a corrosive electrolyte (e.g. water). Certain materials should never be in direct contact with one another (like copper and aluminum), because a galvanic action will corrode one metal at a faster rate than the other. Galvanic corrosion is of particular concern in applications that are high in moisture content, like air conditioning and marine applications.
To assist in corrosion prevention, these rivets have a completely closed end to prevent the entry of liquids, moisture, air and other contaminants into the rivet or the riveted hole. Likewise, this rivet can be used to prevent the leakage of such materials from an assembly.
|Product name||ISO15937 Closed end blind rivets|
|Material||Alumium , steel , stainless steel|
|Delivery time||About 15-20 days|
|Packing||bulk packing, small box packing, plastic bag packing|
|Usage||riveting occasions with large lateral load|
3. Closed-End Blind Rivets Countersunk Head Specifications:
|Series NO.||Nom Rivet Size||D||H||E||R||W||P||F|
|Body Dia||Style 1 Regular Head||Radius||Mandrel Dia||Mandrel Protrusion||Blind Side Protrusion|
|Head Dia||Head Height||All Materials|
|4||1/8 (.125)||0.128||0.122||0.252||0.221||0.042||0.025||0.074||1||Equal to "L" Rivet Body Length|
The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet.
This expands the blind end of the rivet and then the mandrel snaps off.
These types of blind rivets have non-locking mandrels and are sometimes avoided for critical structural joints because the mandrels may fall out, due to vibration or other reasons, leaving a hollow rivet that has a lower load-carrying capability than solid rivets.
The blind rivets are mainly used when access to the joint is only available from one side.
5. More pictures:
CLOSE END BLIND RIVETS
Contact Person: Tom